CAD SchemCAD
Memórias SPI BIOS Flash (1.8V & 3.3V)GigaDeviceSOIC-8 / WSON-8 / USON-8⚠️ 1.8V SPI FLASH

GD25LQ256D — Datasheet PDF, Pinagem (Pinout), Código SMD, Equivalentes e Placas Doadoras

⚠️ 1.8V ONLY! 256Mbit (32MB) Serial SPI NOR Flash (GigaDevice, GD25LQ/LB series = 1.8V). MUST use a 1.8V programmer level-shifter adapter — 3.3V will destroy the IC!

Fabricante
GigaDevice
Encapsulamento
SOIC-8 / WSON-8 / USON-8
Tensão de Entrada (VIN)
1.65V – 1.95V (1.8V ONLY)
Saída / Arquitetura
256Mbit (32MB) ⚠️ 1.8V SPI NOR BIOS/EC Flash
Marcação SMD

Tabela de Diagnóstico no Multímetro e Pinagem de Start — GD25LQ256D

WARNING: 1.8V Supply Only! Program ONLY with a 1.8V level-shifting adapter (direct 3.3V connection can permanently damage the IC)!

Pino # Sinal Função Tensão Esperada / Diagnóstico
8VCC (1.8V!)power_in⚠️ STRICTLY 1.8V (1.65V–1.95V) supply!
1CS#buses1.8V Active-LOW Chip Select
6CLKbuses1.8V Serial SPI Clock
5/2DI/DO (IO0/IO1)buses1.8V SPI Data IO0/IO1
4GNDgndGround

Códigos SMD e Substitutos Compatíveis (Equivalentes)

Códigos de Marcação SMD
Equivalentes Pino a Pino

Sem substituto universal direto — utilize GD25LQ256D conferindo o esquema elétrico.

Confira sempre o encapsulamento QFN/SOIC e a polaridade de ACOK / EN no esquema antes da substituição.

Placas-Mãe Doadoras (Sucata) com GD25LQ256D

Pesquise GD25LQ256D nos esquemas elétricos e BoardViews do SchemCAD.

🔎 GD25LQ256D →

Perguntas Frequentes de Reparo — GD25LQ256D

What is GD25LQ256D used for on a laptop motherboard?
GD25LQ256D by GigaDevice is a Memórias SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 / USON-8 package (input voltage 1.65V – 1.95V (1.8V ONLY); output/spec: 256Mbit (32MB) ⚠️ 1.8V SPI NOR BIOS/EC Flash). ⚠️ 1.8V ONLY! 256Mbit (32MB) Serial SPI NOR Flash (GigaDevice, GD25LQ/LB series = 1.8V). MUST use a 1.8V programmer level-shifter adapter — 3.3V will destroy the IC!
What is the SMD marking code for GD25LQ256D?
The top silkscreen SMD marking code for GD25LQ256D is 25LQ256 (trailing characters on the package represent factory date/lot codes). Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of GD25LQ256D?
Key multimeter diagnostic pin measurements for GD25LQ256D: Pin 8 (VCC (1.8V!)): ⚠️ STRICTLY 1.8V (1.65V–1.95V) supply!; Pin 1 (CS#): 1.8V Active-LOW Chip Select; Pin 6 (CLK): 1.8V Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): 1.8V SPI Data IO0/IO1; Pin 4 (GND): Ground. CRITICAL: GD25LQ256D is a 1.8V SPI NOR flash — always use a 1.8V level-shifter adapter on external programmers!
Which laptop motherboards use GD25LQ256D (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate GD25LQ256D across 39,000+ laptop schematics and BoardView layouts.