CAD SchemCAD
SPI BIOS Flash Bellekler (1.8V & 3.3V)GigaDeviceSOIC-8 / WSON-8 / USON-8⚠️ 1.8V SPI FLASH

GD25LQ256D — Datasheet PDF, Pinout, Start Voltajları, SMD Kodu ve Donör Anakartlar

⚠️ 1.8V ONLY! 256Mbit (32MB) Serial SPI NOR Flash (GigaDevice, GD25LQ/LB series = 1.8V). MUST use a 1.8V programmer level-shifter adapter — 3.3V will destroy the IC!

Üretici
GigaDevice
Kılıf (Package)
SOIC-8 / WSON-8 / USON-8
Giriş Voltajı (VIN)
1.65V – 1.95V (1.8V ONLY)
Çıkış / Mimari
256Mbit (32MB) ⚠️ 1.8V SPI NOR BIOS/EC Flash
SMD Üst Kodu

Multimetre Diyagnostik ve Start Pinout Tablosu — GD25LQ256D

WARNING: 1.8V Supply Only! Program ONLY with a 1.8V level-shifting adapter (direct 3.3V connection can permanently damage the IC)!

Pin # Sinyal Adı Görevi Voltaj / Multimetre Ölçüm Açıklaması
8VCC (1.8V!)power_in⚠️ STRICTLY 1.8V (1.65V–1.95V) supply!
1CS#buses1.8V Active-LOW Chip Select
6CLKbuses1.8V Serial SPI Clock
5/2DI/DO (IO0/IO1)buses1.8V SPI Data IO0/IO1
4GNDgndGround

SMD Kodları ve Uyumlu Muadil Entegreler (Karşılıkları)

SMD Üst Baskı Kodları
Birebir (Pin-to-Pin) Muadiller

Doğrudan evrensel muadil doğrulanmadı — orijinal GD25LQ256D kullanın.

Muadil entegre takmadan önce kılıf tipini ve ACOK / EN sinyal polaritesini şemadan mutlaka kontrol edin.

GD25LQ256D Kullanan Donör Laptop Anakartları

SchemCAD şema ve BoardView arşivinde GD25LQ256D araması yapın.

🔎 GD25LQ256D →

Teknik Tamir SSS — GD25LQ256D

What is GD25LQ256D used for on a laptop motherboard?
GD25LQ256D by GigaDevice is a SPI BIOS Flash Bellekler (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 / USON-8 package (input voltage 1.65V – 1.95V (1.8V ONLY); output/spec: 256Mbit (32MB) ⚠️ 1.8V SPI NOR BIOS/EC Flash). ⚠️ 1.8V ONLY! 256Mbit (32MB) Serial SPI NOR Flash (GigaDevice, GD25LQ/LB series = 1.8V). MUST use a 1.8V programmer level-shifter adapter — 3.3V will destroy the IC!
What is the SMD marking code for GD25LQ256D?
The top silkscreen SMD marking code for GD25LQ256D is 25LQ256 (trailing characters on the package represent factory date/lot codes). Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of GD25LQ256D?
Key multimeter diagnostic pin measurements for GD25LQ256D: Pin 8 (VCC (1.8V!)): ⚠️ STRICTLY 1.8V (1.65V–1.95V) supply!; Pin 1 (CS#): 1.8V Active-LOW Chip Select; Pin 6 (CLK): 1.8V Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): 1.8V SPI Data IO0/IO1; Pin 4 (GND): Ground. CRITICAL: GD25LQ256D is a 1.8V SPI NOR flash — always use a 1.8V level-shifter adapter on external programmers!
Which laptop motherboards use GD25LQ256D (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate GD25LQ256D across 39,000+ laptop schematics and BoardView layouts.