CAD SchemCAD
Memorias SPI BIOS Flash (1.8V & 3.3V)GigaDeviceSOIC-8 / WSON-8 / USON-8⚠️ 1.8V SPI FLASH

GD25LQ80C — Datasheet PDF, Pinout (VCC (1.8V!), CS#, CLK, DI/DO (IO0/IO1)), Código SMD, Equivalentes y Placas Donantes

⚠️ 1.8V ONLY! 8Mbit (1MB) Serial SPI NOR Flash (GigaDevice, GD25LQ/LB series = 1.8V). MUST use a 1.8V programmer level-shifter adapter — 3.3V will destroy the IC!

Fabricante
GigaDevice
Encapsulado
SOIC-8 / WSON-8 / USON-8
Voltaje de Entrada (VIN)
1.65V – 1.95V (1.8V ONLY)
Salida / Arquitectura
8Mbit (1MB) ⚠️ 1.8V SPI NOR BIOS/EC Flash
Código SMD

Tabla de Diagnóstico con Multímetro y Pines de Arranque — GD25LQ80C

WARNING: 1.8V Supply Only! Program ONLY with a 1.8V level-shifting adapter (direct 3.3V connection can permanently damage the IC)!

Pin # Señal Función Voltaje Esperado / Diagnóstico
8VCC (1.8V!)power_in⚠️ STRICTLY 1.8V (1.65V–1.95V) supply!
1CS#buses1.8V Active-LOW Chip Select
6CLKbuses1.8V Serial SPI Clock
5/2DI/DO (IO0/IO1)buses1.8V SPI Data IO0/IO1
4GNDgndGround

Códigos SMD y Reemplazos Compatibles (Equivalentes)

Códigos de Marcado Superior SMD
Equivalentes Pin a Pin y Reemplazos

Sin reemplazo universal directo; utilice GD25LQ80C original verificando el esquema.

Verifique siempre el encapsulado QFN/SOIC y la polaridad de ACOK / EN en el esquema antes de soldar un equivalente.

Placas Base Donantes de Portátiles con GD25LQ80C

Busque GD25LQ80C en los esquemas PDF y BoardViews interactivos de SchemCAD.

🔎 GD25LQ80C →

Preguntas Frecuentes de Reparación — GD25LQ80C

What is GD25LQ80C used for on a laptop motherboard?
GD25LQ80C by GigaDevice is a Memorias SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 / USON-8 package (input voltage 1.65V – 1.95V (1.8V ONLY); output/spec: 8Mbit (1MB) ⚠️ 1.8V SPI NOR BIOS/EC Flash). ⚠️ 1.8V ONLY! 8Mbit (1MB) Serial SPI NOR Flash (GigaDevice, GD25LQ/LB series = 1.8V). MUST use a 1.8V programmer level-shifter adapter — 3.3V will destroy the IC!
What is the SMD marking code for GD25LQ80C?
The top silkscreen SMD marking code for GD25LQ80C is 25LQ80 (trailing characters on the package represent factory date/lot codes). Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of GD25LQ80C?
Key multimeter diagnostic pin measurements for GD25LQ80C: Pin 8 (VCC (1.8V!)): ⚠️ STRICTLY 1.8V (1.65V–1.95V) supply!; Pin 1 (CS#): 1.8V Active-LOW Chip Select; Pin 6 (CLK): 1.8V Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): 1.8V SPI Data IO0/IO1; Pin 4 (GND): Ground. CRITICAL: GD25LQ80C is a 1.8V SPI NOR flash — always use a 1.8V level-shifter adapter on external programmers!
Which laptop motherboards use GD25LQ80C (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate GD25LQ80C across 39,000+ laptop schematics and BoardView layouts.