CAD SchemCAD
IC Nhớ SPI BIOS Flash (1.8V & 3.3V)GigaDeviceSOIC-8 / WSON-8 / USON-8⚠️ 1.8V SPI FLASH

GD25LQ80C — Datasheet PDF, Sơ đồ chân (VCC (1.8V!), CS#, CLK, DI/DO (IO0/IO1)), Mã lưng SMD, IC Tương đương & Main xác

⚠️ 1.8V ONLY! 8Mbit (1MB) Serial SPI NOR Flash (GigaDevice, GD25LQ/LB series = 1.8V). MUST use a 1.8V programmer level-shifter adapter — 3.3V will destroy the IC!

Hãng sản xuất
GigaDevice
Kiểu chân (Package)
SOIC-8 / WSON-8 / USON-8
Điện áp vào (VIN / VCC)
1.65V – 1.95V (1.8V ONLY)
Ngõ ra / Cấu trúc
8Mbit (1MB) ⚠️ 1.8V SPI NOR BIOS/EC Flash
Mã lưng SMD

Bảng Đo Đạc Đồng Hồ & Điều Kiện Chạy (Pinout) — GD25LQ80C

WARNING: 1.8V Supply Only! Program ONLY with a 1.8V level-shifting adapter (direct 3.3V connection can permanently damage the IC)!

Chân # Tên Lệnh / Tín Hiệu Chức Năng Áp Chuẩn / Hướng Dẫn Đo Kiểm
8VCC (1.8V!)power_in⚠️ STRICTLY 1.8V (1.65V–1.95V) supply!
1CS#buses1.8V Active-LOW Chip Select
6CLKbuses1.8V Serial SPI Clock
5/2DI/DO (IO0/IO1)buses1.8V SPI Data IO0/IO1
4GNDgndGround

Mã Lưng SMD & IC Thay Thế Tương Đương

Mã Ký Hiệu Lưng SMD
IC Tương Đương Thay Thế Chân-Đổi-Chân

Chưa có mã tương đương phổ thông — nên thay đúng mã GD25LQ80C.

Luôn đối chiếu sơ đồ chân QFN/SOIC và mức tích cực của lệnh ACOK / EN trên schematic trước khi đóng IC tương đương.

Main Xác Laptop (Donor Motherboards) Có Chứa GD25LQ80C

Tìm kiếm vị trí GD25LQ80C trên 39.000+ schematic & BoardView tại SchemCAD.

🔎 GD25LQ80C →

Câu Hỏi Kỹ Thuật Thường Gặp — GD25LQ80C

What is GD25LQ80C used for on a laptop motherboard?
GD25LQ80C by GigaDevice is a IC Nhớ SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 / USON-8 package (input voltage 1.65V – 1.95V (1.8V ONLY); output/spec: 8Mbit (1MB) ⚠️ 1.8V SPI NOR BIOS/EC Flash). ⚠️ 1.8V ONLY! 8Mbit (1MB) Serial SPI NOR Flash (GigaDevice, GD25LQ/LB series = 1.8V). MUST use a 1.8V programmer level-shifter adapter — 3.3V will destroy the IC!
What is the SMD marking code for GD25LQ80C?
The top silkscreen SMD marking code for GD25LQ80C is 25LQ80 (trailing characters on the package represent factory date/lot codes). Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of GD25LQ80C?
Key multimeter diagnostic pin measurements for GD25LQ80C: Pin 8 (VCC (1.8V!)): ⚠️ STRICTLY 1.8V (1.65V–1.95V) supply!; Pin 1 (CS#): 1.8V Active-LOW Chip Select; Pin 6 (CLK): 1.8V Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): 1.8V SPI Data IO0/IO1; Pin 4 (GND): Ground. CRITICAL: GD25LQ80C is a 1.8V SPI NOR flash — always use a 1.8V level-shifter adapter on external programmers!
Which laptop motherboards use GD25LQ80C (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate GD25LQ80C across 39,000+ laptop schematics and BoardView layouts.