CAD SchemCAD
SPI BIOS Flash (1.8V & 3.3V)GigaDeviceSOIC-8 (208mil) / WSON-8

GD25Q64CSIG — Datasheet PDF, Startup Pinout (VCC, CS#, CLK, DI (IO0) / DO (IO1)), SMD Code, Equivalents & Donor Boards

64Mbit (8MB) 3.3V SPI NOR Flash (3.3V Q-series; DO NOT confuse with 1.8V LQ-series!)

Manufacturer
GigaDevice
Package / Case
SOIC-8 (208mil) / WSON-8
Input Voltage (VIN / VCC)
2.7V – 3.6V (3.3V Standard)
Output / Architecture
64Mbit (8MB) 3.3V SPI NOR Flash
SMD Top Marking

Multimeter Diagnostic & Startup Pinout Table — GD25Q64CSIG

Pin # Signal Name Role Voltage / Diagnostic Description
8VCCpower_in3.3V supply input (2.7V–3.6V)
1CS#busesActive-LOW Chip Select (oscilloscope activity here confirms EC/PCH reads BIOS)
6CLKbusesSerial SPI Clock input
5/2DI (IO0) / DO (IO1)busesSerial Data In/Out (IO0/IO1 in Quad mode)
3/7WP# (IO2) / HOLD# (IO3)controlWrite Protect / Hold (IO2/IO3 in QSPI; preserve QE bit when flashing!)
4GNDgndGround

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes
Pin-to-Pin Equivalents & Cross-Reference Analogs

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using GD25Q64CSIG

Search SchemCAD interactive schematics and BoardViews to locate GD25Q64CSIG across 39,000+ indexed laptop motherboards.

🔎 GD25Q64CSIG →

Technical Repair FAQ — GD25Q64CSIG

What is GD25Q64CSIG used for on a laptop motherboard?
GD25Q64CSIG by GigaDevice is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 (208mil) / WSON-8 package (input voltage 2.7V – 3.6V (3.3V Standard); output/spec: 64Mbit (8MB) 3.3V SPI NOR Flash). 64Mbit (8MB) 3.3V SPI NOR Flash (3.3V Q-series; DO NOT confuse with 1.8V LQ-series!)
What is the SMD marking code for GD25Q64CSIG?
The top silkscreen SMD marking code for GD25Q64CSIG is GD25Q64, 25Q64CSIG (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: W25Q64JV, GD25B64C, XM25QH64A.
What are the key diagnostic pins / startup conditions of GD25Q64CSIG?
Key multimeter diagnostic pin measurements for GD25Q64CSIG: Pin 8 (VCC): 3.3V supply input (2.7V–3.6V); Pin 1 (CS#): Active-LOW Chip Select (oscilloscope activity here confirms EC/PCH reads BIOS); Pin 6 (CLK): Serial SPI Clock input; Pin 5/2 (DI (IO0) / DO (IO1)): Serial Data In/Out (IO0/IO1 in Quad mode); Pin 3/7 (WP# (IO2) / HOLD# (IO3)): Write Protect / Hold (IO2/IO3 in QSPI; preserve QE bit when flashing!).
Which laptop motherboards use GD25Q64CSIG (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate GD25Q64CSIG across 39,000+ laptop schematics and BoardView layouts.