CAD SchemCAD
EC/KBC ControllersMicrochipWFBGA-144

MEC1503 — Datasheet PDF, Startup Pinout (VTR1 (+3.3VALW), VTR3 (+1.8VALW), ESPI_IO0..3 / RST#, SMB0..4), SMD Code, Equivalents & Donor Boards

32-bit ARM Cortex-M4F eSPI Embedded Controller used in modern Dell XPS/Latitude and Framework laptops

Manufacturer
Microchip
Subsystem Category
Package / Case
WFBGA-144
Input Voltage (VIN / VCC)
3.3V / 1.8V
Output / Architecture
Modern ARM Cortex-M4F eSPI Embedded Controller
SMD Top Marking

Multimeter Diagnostic & Startup Pinout Table — MEC1503

Pin # Signal Name Role Voltage / Diagnostic Description
VTR1VTR1 (+3.3VALW)power_in+3.3V standby supply
VTR3VTR3 (+1.8VALW)power_in1.8V standby supply for eSPI/QSPI
eSPIESPI_IO0..3 / RST#buses1.8V eSPI interface
I2CSMB0..4busesI2C/SMBus ports to Charger & PD

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes
Pin-to-Pin Equivalents & Cross-Reference Analogs

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using MEC1503

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
LenovoLENOVO NM-D961NM-D961Schematic Page #61Open Schematic →
LenovoLenovo ThinkPad X1 Yoga Gen 6 - NM-D341 Ver 3.13NM-D341Schematic Page #1Open Schematic →
LenovoLenovo ThinkPad X1 Yoga Gen 6 - NM-D341 Ver 3.13NM-D341Schematic Page #60Open Schematic →

Technical Repair FAQ — MEC1503

What is MEC1503 used for on a laptop motherboard?
MEC1503 by Microchip is a EC/KBC Controllers integrated circuit in a WFBGA-144 package (input voltage 3.3V / 1.8V; output/spec: Modern ARM Cortex-M4F eSPI Embedded Controller). 32-bit ARM Cortex-M4F eSPI Embedded Controller used in modern Dell XPS/Latitude and Framework laptops
What is the SMD marking code for MEC1503?
The top silkscreen SMD marking code for MEC1503 is MEC1503 (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: MEC1503.
What are the key diagnostic pins / startup conditions of MEC1503?
Key multimeter diagnostic pin measurements for MEC1503: Pin VTR1 (VTR1 (+3.3VALW)): +3.3V standby supply; Pin VTR3 (VTR3 (+1.8VALW)): 1.8V standby supply for eSPI/QSPI; Pin eSPI (ESPI_IO0..3 / RST#): 1.8V eSPI interface; Pin I2C (SMB0..4): I2C/SMBus ports to Charger & PD.
Which laptop motherboards use MEC1503 (donor boards)?
Confirmed laptop donor motherboards using MEC1503 include: Lenovo LENOVO NM-D961 (NM-D961), Lenovo Lenovo ThinkPad X1 Yoga Gen 6 - NM-D341 Ver 3.13 (NM-D341), Lenovo Lenovo ThinkPad X1 Yoga Gen 6 - NM-D341 Ver 3.13 (NM-D341). Search SchemCAD for additional board revisions.