CAD SchemCAD
EC/KBC I/O Kontrolcü EntegreleriMicrochipWFBGA-144

MEC1503 — Datasheet PDF, Pinout, Start Voltajları, SMD Kodu ve Donör Anakartlar

32-bit ARM Cortex-M4F eSPI Embedded Controller used in modern Dell XPS/Latitude and Framework laptops

Üretici
Microchip
Kılıf (Package)
WFBGA-144
Giriş Voltajı (VIN)
3.3V / 1.8V
Çıkış / Mimari
Modern ARM Cortex-M4F eSPI Embedded Controller
SMD Üst Kodu

Multimetre Diyagnostik ve Start Pinout Tablosu — MEC1503

Pin # Sinyal Adı Görevi Voltaj / Multimetre Ölçüm Açıklaması
VTR1VTR1 (+3.3VALW)power_in+3.3V standby supply
VTR3VTR3 (+1.8VALW)power_in1.8V standby supply for eSPI/QSPI
eSPIESPI_IO0..3 / RST#buses1.8V eSPI interface
I2CSMB0..4busesI2C/SMBus ports to Charger & PD

SMD Kodları ve Uyumlu Muadil Entegreler (Karşılıkları)

SMD Üst Baskı Kodları
Birebir (Pin-to-Pin) Muadiller

Muadil entegre takmadan önce kılıf tipini ve ACOK / EN sinyal polaritesini şemadan mutlaka kontrol edin.

MEC1503 Kullanan Donör Laptop Anakartları

Marka Laptop / Anakart Modeli Platform Kodu Şema Sayfası İşlem
LenovoLENOVO NM-D961NM-D961Schematic Page #61Şemayı Aç →
LenovoLenovo ThinkPad X1 Yoga Gen 6 - NM-D341 Ver 3.13NM-D341Schematic Page #1Şemayı Aç →
LenovoLenovo ThinkPad X1 Yoga Gen 6 - NM-D341 Ver 3.13NM-D341Schematic Page #60Şemayı Aç →

Teknik Tamir SSS — MEC1503

What is MEC1503 used for on a laptop motherboard?
MEC1503 by Microchip is a EC/KBC I/O Kontrolcü Entegreleri integrated circuit in a WFBGA-144 package (input voltage 3.3V / 1.8V; output/spec: Modern ARM Cortex-M4F eSPI Embedded Controller). 32-bit ARM Cortex-M4F eSPI Embedded Controller used in modern Dell XPS/Latitude and Framework laptops
What is the SMD marking code for MEC1503?
The top silkscreen SMD marking code for MEC1503 is MEC1503 (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: MEC1503.
What are the key diagnostic pins / startup conditions of MEC1503?
Key multimeter diagnostic pin measurements for MEC1503: Pin VTR1 (VTR1 (+3.3VALW)): +3.3V standby supply; Pin VTR3 (VTR3 (+1.8VALW)): 1.8V standby supply for eSPI/QSPI; Pin eSPI (ESPI_IO0..3 / RST#): 1.8V eSPI interface; Pin I2C (SMB0..4): I2C/SMBus ports to Charger & PD.
Which laptop motherboards use MEC1503 (donor boards)?
Confirmed laptop donor motherboards using MEC1503 include: Lenovo LENOVO NM-D961 (NM-D961), Lenovo Lenovo ThinkPad X1 Yoga Gen 6 - NM-D341 Ver 3.13 (NM-D341), Lenovo Lenovo ThinkPad X1 Yoga Gen 6 - NM-D341 Ver 3.13 (NM-D341). Search SchemCAD for additional board revisions.