CAD SchemCAD
SPI BIOS Flash (1.8V & 3.3V)MacronixSOIC-8 / WSON-8 / USON-8⚠️ 1.8V SPI FLASH

MX25U8033E — Datasheet PDF, Startup Pinout (VCC (1.8V!), CS#, CLK, DI/DO (IO0/IO1)), SMD Code, Equivalents & Donor Boards

⚠️ 1.8V ONLY! 8Mbit (1MB) Serial SPI NOR Flash (Macronix, MX25U series = 1.8V). MUST use a 1.8V programmer level-shifter adapter — 3.3V will destroy the IC!

Manufacturer
Macronix
Package / Case
SOIC-8 / WSON-8 / USON-8
Input Voltage (VIN / VCC)
1.65V – 1.95V (1.8V ONLY)
Output / Architecture
8Mbit (1MB) ⚠️ 1.8V SPI NOR BIOS/EC Flash
SMD Top Marking
MX25U8033E

Multimeter Diagnostic & Startup Pinout Table — MX25U8033E

WARNING: 1.8V Supply Only! Program ONLY with a 1.8V level-shifting adapter (direct 3.3V connection can permanently damage the IC)!

Pin # Signal Name Role Voltage / Diagnostic Description
8VCC (1.8V!)power_in⚠️ STRICTLY 1.8V (1.65V–1.95V) supply!
1CS#buses1.8V Active-LOW Chip Select
6CLKbuses1.8V Serial SPI Clock
5/2DI/DO (IO0/IO1)buses1.8V SPI Data IO0/IO1
4GNDgndGround

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (MX25U8033E)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact MX25U8033E suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using MX25U8033E

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
MSIMSI MS-14B2 VER 0A MS-14B21 REV AMS-14B2Schematic Page #43Open Schematic →
MSIMSI MS-14B2 VER 10 MS-14B21MS-14B2Schematic Page #43Open Schematic →
MSIMSI MS-16P6-MS-17C6MS-16P6Schematic Page #20Open Schematic →
MSIMSI MS-16R1 - MS-16R11MS-16R1Schematic Page #20Open Schematic →
ASUSASUS FX505DU REV20—Schematic Page #38Open Schematic →
ASUSASUS FX506LU REV1.2—Schematic Page #22Open Schematic →
ASUSASUS TUF Gaming FX505DU REV20—Schematic Page #38Open Schematic →
ASUSASUS FX506L FX706L DABKXDMB8E0 Rev E DABKXDMB8F0 Rev F BKXDDABKXDMB8E0—Open Schematic →

Technical Repair FAQ — MX25U8033E

What is MX25U8033E used for on a laptop motherboard?
MX25U8033E by Macronix is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 / USON-8 package (input voltage 1.65V – 1.95V (1.8V ONLY); output/spec: 8Mbit (1MB) ⚠️ 1.8V SPI NOR BIOS/EC Flash). ⚠️ 1.8V ONLY! 8Mbit (1MB) Serial SPI NOR Flash (Macronix, MX25U series = 1.8V). MUST use a 1.8V programmer level-shifter adapter — 3.3V will destroy the IC!
What is the SMD marking code for MX25U8033E?
MX25U8033E is top-marked directly with its part identifier (MX25U8033E) on the SOIC-8 / WSON-8 / USON-8 package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of MX25U8033E?
Key multimeter diagnostic pin measurements for MX25U8033E: Pin 8 (VCC (1.8V!)): ⚠️ STRICTLY 1.8V (1.65V–1.95V) supply!; Pin 1 (CS#): 1.8V Active-LOW Chip Select; Pin 6 (CLK): 1.8V Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): 1.8V SPI Data IO0/IO1; Pin 4 (GND): Ground. CRITICAL: MX25U8033E is a 1.8V SPI NOR flash — always use a 1.8V level-shifter adapter on external programmers!
Which laptop motherboards use MX25U8033E (donor boards)?
Confirmed laptop donor motherboards using MX25U8033E include: MSI MSI MS-14B2 VER 0A MS-14B21 REV A (MS-14B2), MSI MSI MS-14B2 VER 10 MS-14B21 (MS-14B2), MSI MSI MS-16P6-MS-17C6 (MS-16P6), MSI MSI MS-16R1 - MS-16R11 (MS-16R1), ASUS ASUS FX505DU REV20. Search SchemCAD for additional board revisions.