CAD SchemCAD
Battery ChargersO2MicroSOP-16

OZ8602GN — Datasheet PDF, Startup Pinout (VDDP, VAC, ACAV_IN, IACP/IACN), SMD Code, Equivalents & Donor Boards

Notorious SOP-16 Battery Charger on Clevo/Fujitsu/Hasee boards: frequently blows on hot-plug spikes and kills EC ADAPTER_IN pin!

Manufacturer
O2Micro
Subsystem Category
Package / Case
SOP-16
Input Voltage (VIN / VCC)
7V – 24V
Output / Architecture
2–4S Li-Ion Charger (High Failure Rate!)
SMD Top Marking

Multimeter Diagnostic & Startup Pinout Table — OZ8602GN

Pin # Signal Name Role Voltage / Diagnostic Description
12VDDPpower_inSupply input via 10-ohm fusible resistor
8VACcontrolAdapter voltage sense input
13ACAV_INoutputsAdapter present output to EC (check EC pin for short if IC blew!)
15/16IACP/IACNsignalInput current sense pair

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes
Pin-to-Pin Equivalents & Cross-Reference Analogs

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using OZ8602GN

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
LenovoLenovo F41—Schematic Page #1Open Schematic →

Technical Repair FAQ — OZ8602GN

What is OZ8602GN used for on a laptop motherboard?
OZ8602GN by O2Micro is a Battery Chargers integrated circuit in a SOP-16 package (input voltage 7V – 24V; output/spec: 2–4S Li-Ion Charger (High Failure Rate!)). Notorious SOP-16 Battery Charger on Clevo/Fujitsu/Hasee boards: frequently blows on hot-plug spikes and kills EC ADAPTER_IN pin!
What is the SMD marking code for OZ8602GN?
The top silkscreen SMD marking code for OZ8602GN is OZ8602, 8602GN (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: Только новый OZ8602GN (обязательно проверить входные резисторы 10 Ом и пин EC!).
What are the key diagnostic pins / startup conditions of OZ8602GN?
Key multimeter diagnostic pin measurements for OZ8602GN: Pin 12 (VDDP): Supply input via 10-ohm fusible resistor; Pin 8 (VAC): Adapter voltage sense input; Pin 13 (ACAV_IN): Adapter present output to EC (check EC pin for short if IC blew!); Pin 15/16 (IACP/IACN): Input current sense pair.
Which laptop motherboards use OZ8602GN (donor boards)?
Confirmed laptop donor motherboards using OZ8602GN include: Lenovo Lenovo F41. Search SchemCAD for additional board revisions.