CAD SchemCAD
3.3V/5V Buck PWMRichtekWQFN-20 (3x3mm)

RT6585AGQW — Datasheet PDF, Startup Pinout (VIN, LDO3, LDO5, ENLDO/ENM), SMD Code, Equivalents & Donor Boards

Low-Quiescent Dual 5V / 3.3V Step-Down Controller with LDO3 Always-On (top mark 5Y= / 3J=)

Manufacturer
Richtek
Subsystem Category
Package / Case
WQFN-20 (3x3mm)
Input Voltage (VIN / VCC)
5.5V – 25V
Output / Architecture
Dual 5V / 3.3V Buck PWM (Ultra-Low Iq)
SMD Top Marking

Multimeter Diagnostic & Startup Pinout Table — RT6585AGQW

Pin # Signal Name Role Voltage / Diagnostic Description
11VINpower_inMain supply input 5.5V–25V from B+
15LDO3outputs3.3V LDO output for standby EC rail
14LDO5outputs5V LDO output for internal MOSFET gate drivers
12/13ENLDO/ENMcontrolLDO enable (pin 12) and master PWM enable (pin 13)
2/4ENTRIP1/ENTRIP2controlChannel 1/2 enable & OCP threshold resistor to GND
6PGOODoutputsPower-Good open-drain indicator

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes
Pin-to-Pin Equivalents & Cross-Reference Analogs

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using RT6585AGQW

Search SchemCAD interactive schematics and BoardViews to locate RT6585AGQW across 39,000+ indexed laptop motherboards.

🔎 RT6585AGQW →

Technical Repair FAQ — RT6585AGQW

What is RT6585AGQW used for on a laptop motherboard?
RT6585AGQW by Richtek is a 3.3V/5V Buck PWM integrated circuit in a WQFN-20 (3x3mm) package (input voltage 5.5V – 25V; output/spec: Dual 5V / 3.3V Buck PWM (Ultra-Low Iq)). Low-Quiescent Dual 5V / 3.3V Step-Down Controller with LDO3 Always-On (top mark 5Y= / 3J=)
What is the SMD marking code for RT6585AGQW?
The top silkscreen SMD marking code for RT6585AGQW is 5Y=, 3J= (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: RT6585B.
What are the key diagnostic pins / startup conditions of RT6585AGQW?
Key multimeter diagnostic pin measurements for RT6585AGQW: Pin 11 (VIN): Main supply input 5.5V–25V from B+; Pin 15 (LDO3): 3.3V LDO output for standby EC rail; Pin 14 (LDO5): 5V LDO output for internal MOSFET gate drivers; Pin 12/13 (ENLDO/ENM): LDO enable (pin 12) and master PWM enable (pin 13); Pin 2/4 (ENTRIP1/ENTRIP2): Channel 1/2 enable & OCP threshold resistor to GND.
Which laptop motherboards use RT6585AGQW (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate RT6585AGQW across 39,000+ laptop schematics and BoardView layouts.