CAD SchemCAD
PWM Buck 3.3V/5V Always (3.3V/5V Buck PWM)RichtekWQFN-20 (3x3mm)

RT6585AGQW — Datasheet PDF, Pinout (VIN, LDO3, LDO5, ENLDO/ENM), Código SMD, Equivalentes y Placas Donantes

Low-Quiescent Dual 5V / 3.3V Step-Down Controller with LDO3 Always-On (top mark 5Y= / 3J=)

Fabricante
Richtek
Encapsulado
WQFN-20 (3x3mm)
Voltaje de Entrada (VIN)
5.5V – 25V
Salida / Arquitectura
Dual 5V / 3.3V Buck PWM (Ultra-Low Iq)
Código SMD

Tabla de Diagnóstico con Multímetro y Pines de Arranque — RT6585AGQW

Pin # Señal Función Voltaje Esperado / Diagnóstico
11VINpower_inMain supply input 5.5V–25V from B+
15LDO3outputs3.3V LDO output for standby EC rail
14LDO5outputs5V LDO output for internal MOSFET gate drivers
12/13ENLDO/ENMcontrolLDO enable (pin 12) and master PWM enable (pin 13)
2/4ENTRIP1/ENTRIP2controlChannel 1/2 enable & OCP threshold resistor to GND
6PGOODoutputsPower-Good open-drain indicator

Códigos SMD y Reemplazos Compatibles (Equivalentes)

Códigos de Marcado Superior SMD
Equivalentes Pin a Pin y Reemplazos

Verifique siempre el encapsulado QFN/SOIC y la polaridad de ACOK / EN en el esquema antes de soldar un equivalente.

Placas Base Donantes de Portátiles con RT6585AGQW

Busque RT6585AGQW en los esquemas PDF y BoardViews interactivos de SchemCAD.

🔎 RT6585AGQW →

Preguntas Frecuentes de Reparación — RT6585AGQW

What is RT6585AGQW used for on a laptop motherboard?
RT6585AGQW by Richtek is a PWM Buck 3.3V/5V Always (3.3V/5V Buck PWM) integrated circuit in a WQFN-20 (3x3mm) package (input voltage 5.5V – 25V; output/spec: Dual 5V / 3.3V Buck PWM (Ultra-Low Iq)). Low-Quiescent Dual 5V / 3.3V Step-Down Controller with LDO3 Always-On (top mark 5Y= / 3J=)
What is the SMD marking code for RT6585AGQW?
The top silkscreen SMD marking code for RT6585AGQW is 5Y=, 3J= (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: RT6585B.
What are the key diagnostic pins / startup conditions of RT6585AGQW?
Key multimeter diagnostic pin measurements for RT6585AGQW: Pin 11 (VIN): Main supply input 5.5V–25V from B+; Pin 15 (LDO3): 3.3V LDO output for standby EC rail; Pin 14 (LDO5): 5V LDO output for internal MOSFET gate drivers; Pin 12/13 (ENLDO/ENM): LDO enable (pin 12) and master PWM enable (pin 13); Pin 2/4 (ENTRIP1/ENTRIP2): Channel 1/2 enable & OCP threshold resistor to GND.
Which laptop motherboards use RT6585AGQW (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate RT6585AGQW across 39,000+ laptop schematics and BoardView layouts.