CAD SchemCAD
3.3V/5V Buck PWMRichtekWQFN-24 (4x4mm)

RT8205MZQW — Datasheet PDF, Startup Pinout (VIN, VREG3, VREG5, EN0), SMD Code, Equivalents & Donor Boards

Dual 3.3V / 5V System Buck Controller with SECFB pin 15 (top mark EN=)

Manufacturer
Richtek
Subsystem Category
Package / Case
WQFN-24 (4x4mm)
Input Voltage (VIN / VCC)
5.5V – 25V
Output / Architecture
Dual 3.3V / 5V Buck PWM (SECFB)
SMD Top Marking

Multimeter Diagnostic & Startup Pinout Table — RT8205MZQW

Pin # Signal Name Role Voltage / Diagnostic Description
16VINpower_inMain high-voltage supply input 5.5V–28V from B+
8VREG3outputsAlways-on 3.3V LDO output (100mA, powers EC in S5)
17VREG5outputsAlways-on 5V LDO output for MOSFET gate drivers
13EN0controlMaster standby enable for LDOs (VREG3/VREG5)
1/6ENTRIP1/ENTRIP2controlSMPS Ch1/Ch2 enable + OCP current limit resistor to GND
23PGOODoutputsPower-Good open-drain output for both SMPS rails

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes
Pin-to-Pin Equivalents & Cross-Reference Analogs

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using RT8205MZQW

Search SchemCAD interactive schematics and BoardViews to locate RT8205MZQW across 39,000+ indexed laptop motherboards.

🔎 RT8205MZQW →

Technical Repair FAQ — RT8205MZQW

What is RT8205MZQW used for on a laptop motherboard?
RT8205MZQW by Richtek is a 3.3V/5V Buck PWM integrated circuit in a WQFN-24 (4x4mm) package (input voltage 5.5V – 25V; output/spec: Dual 3.3V / 5V Buck PWM (SECFB)). Dual 3.3V / 5V System Buck Controller with SECFB pin 15 (top mark EN=)
What is the SMD marking code for RT8205MZQW?
The top silkscreen SMD marking code for RT8205MZQW is EN= (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: RT8223N.
What are the key diagnostic pins / startup conditions of RT8205MZQW?
Key multimeter diagnostic pin measurements for RT8205MZQW: Pin 16 (VIN): Main high-voltage supply input 5.5V–28V from B+; Pin 8 (VREG3): Always-on 3.3V LDO output (100mA, powers EC in S5); Pin 17 (VREG5): Always-on 5V LDO output for MOSFET gate drivers; Pin 13 (EN0): Master standby enable for LDOs (VREG3/VREG5); Pin 1/6 (ENTRIP1/ENTRIP2): SMPS Ch1/Ch2 enable + OCP current limit resistor to GND.
Which laptop motherboards use RT8205MZQW (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate RT8205MZQW across 39,000+ laptop schematics and BoardView layouts.