CAD SchemCAD
PWM Primário 3.3V/5V (3.3V/5V Buck PWM)RichtekWQFN-24 (4x4mm)

RT8205MZQW — Datasheet PDF, Pinagem (Pinout), Código SMD, Equivalentes e Placas Doadoras

Dual 3.3V / 5V System Buck Controller with SECFB pin 15 (top mark EN=)

Fabricante
Richtek
Encapsulamento
WQFN-24 (4x4mm)
Tensão de Entrada (VIN)
5.5V – 25V
Saída / Arquitetura
Dual 3.3V / 5V Buck PWM (SECFB)
Marcação SMD

Tabela de Diagnóstico no Multímetro e Pinagem de Start — RT8205MZQW

Pino # Sinal Função Tensão Esperada / Diagnóstico
16VINpower_inMain high-voltage supply input 5.5V–28V from B+
8VREG3outputsAlways-on 3.3V LDO output (100mA, powers EC in S5)
17VREG5outputsAlways-on 5V LDO output for MOSFET gate drivers
13EN0controlMaster standby enable for LDOs (VREG3/VREG5)
1/6ENTRIP1/ENTRIP2controlSMPS Ch1/Ch2 enable + OCP current limit resistor to GND
23PGOODoutputsPower-Good open-drain output for both SMPS rails

Códigos SMD e Substitutos Compatíveis (Equivalentes)

Códigos de Marcação SMD
Equivalentes Pino a Pino

Confira sempre o encapsulamento QFN/SOIC e a polaridade de ACOK / EN no esquema antes da substituição.

Placas-Mãe Doadoras (Sucata) com RT8205MZQW

Pesquise RT8205MZQW nos esquemas elétricos e BoardViews do SchemCAD.

🔎 RT8205MZQW →

Perguntas Frequentes de Reparo — RT8205MZQW

What is RT8205MZQW used for on a laptop motherboard?
RT8205MZQW by Richtek is a PWM Primário 3.3V/5V (3.3V/5V Buck PWM) integrated circuit in a WQFN-24 (4x4mm) package (input voltage 5.5V – 25V; output/spec: Dual 3.3V / 5V Buck PWM (SECFB)). Dual 3.3V / 5V System Buck Controller with SECFB pin 15 (top mark EN=)
What is the SMD marking code for RT8205MZQW?
The top silkscreen SMD marking code for RT8205MZQW is EN= (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: RT8223N.
What are the key diagnostic pins / startup conditions of RT8205MZQW?
Key multimeter diagnostic pin measurements for RT8205MZQW: Pin 16 (VIN): Main high-voltage supply input 5.5V–28V from B+; Pin 8 (VREG3): Always-on 3.3V LDO output (100mA, powers EC in S5); Pin 17 (VREG5): Always-on 5V LDO output for MOSFET gate drivers; Pin 13 (EN0): Master standby enable for LDOs (VREG3/VREG5); Pin 1/6 (ENTRIP1/ENTRIP2): SMPS Ch1/Ch2 enable + OCP current limit resistor to GND.
Which laptop motherboards use RT8205MZQW (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate RT8205MZQW across 39,000+ laptop schematics and BoardView layouts.