CAD SchemCAD
SPI BIOS Flash (1.8V & 3.3V)WinbondSOIC-8 / WSON-8

W25Q80BL — Datasheet PDF, Startup Pinout (VCC (3.3V), CS#, CLK, DI/DO (IO0/IO1)), SMD Code, Equivalents & Donor Boards

8Mbit (1MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (Winbond, JV/FV/DV/BV suffix = 3.3V). Preserve QE bit when flashing

Manufacturer
Winbond
Package / Case
SOIC-8 / WSON-8
Input Voltage (VIN / VCC)
2.7V – 3.6V (3.3V Standard)
Output / Architecture
8Mbit (1MB) 3.3V SPI NOR BIOS/EC Flash
SMD Top Marking
W25Q80BL

Multimeter Diagnostic & Startup Pinout Table — W25Q80BL

Pin # Signal Name Role Voltage / Diagnostic Description
8VCC (3.3V)power_in3.3V supply (2.7V–3.6V)
1CS#busesActive-LOW Chip Select
6CLKbusesSerial SPI Clock
5/2DI/DO (IO0/IO1)busesSPI Data IO0/IO1
4GNDgndGround

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (W25Q80BL)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact W25Q80BL suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using W25Q80BL

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
DellDell XPS 15 9550 LA-C361P Rev 0 0 M00 Also XPS P56f SchematicsLA-C361PSchematic Page #70Open Schematic →
DellDell XPS 15-9560 Compal AAM00 LA-C361P Rev 0.1 X00LA-C361PSchematic Page #70Open Schematic →

Technical Repair FAQ — W25Q80BL

What is W25Q80BL used for on a laptop motherboard?
W25Q80BL by Winbond is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 package (input voltage 2.7V – 3.6V (3.3V Standard); output/spec: 8Mbit (1MB) 3.3V SPI NOR BIOS/EC Flash). 8Mbit (1MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (Winbond, JV/FV/DV/BV suffix = 3.3V). Preserve QE bit when flashing
What is the SMD marking code for W25Q80BL?
W25Q80BL is top-marked directly with its part identifier (W25Q80BL) on the SOIC-8 / WSON-8 package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of W25Q80BL?
Key multimeter diagnostic pin measurements for W25Q80BL: Pin 8 (VCC (3.3V)): 3.3V supply (2.7V–3.6V); Pin 1 (CS#): Active-LOW Chip Select; Pin 6 (CLK): Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): SPI Data IO0/IO1; Pin 4 (GND): Ground.
Which laptop motherboards use W25Q80BL (donor boards)?
Confirmed laptop donor motherboards using W25Q80BL include: Dell Dell XPS 15 9550 LA-C361P Rev 0 0 M00 Also XPS P56f Schematics (LA-C361P), Dell Dell XPS 15-9560 Compal AAM00 LA-C361P Rev 0.1 X00 (LA-C361P). Search SchemCAD for additional board revisions.