CAD SchemCAD
SPI BIOS Flash (1.8V & 3.3V)WinbondSOIC-8 / WSON-8

W25Q80JV — Datasheet PDF, Startup Pinout (VCC (3.3V), CS#, CLK, DI/DO (IO0/IO1)), SMD Code, Equivalents & Donor Boards

8Mbit (1MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (Winbond, JV/FV/DV/BV suffix = 3.3V). Preserve QE bit when flashing

Manufacturer
Winbond
Package / Case
SOIC-8 / WSON-8
Input Voltage (VIN / VCC)
2.7V – 3.6V (3.3V)
Output / Architecture
8Mbit (1MB) 3.3V SPI NOR BIOS/EC Flash
SMD Top Marking
W25Q80JV

Multimeter Diagnostic & Startup Pinout Table — W25Q80JV

Pin # Signal Name Role Voltage / Diagnostic Description
8VCC (3.3V)power_in3.3V supply (2.7V–3.6V)
1CS#busesActive-LOW Chip Select
6CLKbusesSerial SPI Clock
5/2DI/DO (IO0/IO1)busesSPI Data IO0/IO1
4GNDgndGround

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (W25Q80JV)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact W25Q80JV suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using W25Q80JV

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
LenovoLenovo Air 15ITL 202 - LCFC NM-D211NM-D211Schematic Page #2Open Schematic →
MSIMSI MS-7C26 Rev1.0MS-7C26Schematic Page #28Open Schematic →
LenovoLenovo LCFC NM-B711 Rev0.1NM-B711Schematic Page #24Open Schematic →
LenovoLenovo NM-B191 Y520 MB N17P SVT 20161125-1430NM-B191Schematic Page #38Open Schematic →
LenovoLenovo NM-B521 x280 FN1KR-3NM-B521Schematic Page #32Open Schematic →
LenovoLenovo NM-C681 S550 Rev01NM-C681Schematic Page #2Open Schematic →
LenovoLenovo NM-C791 Rev10NM-C791Schematic Page #24Open Schematic →
LenovoThinkpad T14 drift NM-C801NM-C801Schematic Page #24Open Schematic →
Lenovolenovo-legion-y520-15ikbn-lcfc-nm-b191-rev-1-0NM-B191Schematic Page #38Open Schematic →
ASUSASUS ROG GL702VMK 60NB0DQ0-MB220060NB0DQ0-MB2200—Open Schematic →

Technical Repair FAQ — W25Q80JV

What is W25Q80JV used for on a laptop motherboard?
W25Q80JV by Winbond is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 package (input voltage 2.7V – 3.6V (3.3V); output/spec: 8Mbit (1MB) 3.3V SPI NOR BIOS/EC Flash). 8Mbit (1MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (Winbond, JV/FV/DV/BV suffix = 3.3V). Preserve QE bit when flashing
What is the SMD marking code for W25Q80JV?
W25Q80JV is top-marked directly with its part identifier (W25Q80JV) on the SOIC-8 / WSON-8 package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of W25Q80JV?
Key multimeter diagnostic pin measurements for W25Q80JV: Pin 8 (VCC (3.3V)): 3.3V supply (2.7V–3.6V); Pin 1 (CS#): Active-LOW Chip Select; Pin 6 (CLK): Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): SPI Data IO0/IO1; Pin 4 (GND): Ground.
Which laptop motherboards use W25Q80JV (donor boards)?
Confirmed laptop donor motherboards using W25Q80JV include: Lenovo Lenovo Air 15ITL 202 - LCFC NM-D211 (NM-D211), MSI MSI MS-7C26 Rev1.0 (MS-7C26), Lenovo Lenovo LCFC NM-B711 Rev0.1 (NM-B711), Lenovo Lenovo NM-B191 Y520 MB N17P SVT 20161125-1430 (NM-B191), Lenovo Lenovo NM-B521 x280 FN1KR-3 (NM-B521). Search SchemCAD for additional board revisions.