CAD SchemCAD
SPI BIOS Flash (1.8V & 3.3V)WinbondSOIC-8 / WSON-8

W25X64FV — Datasheet PDF, Startup Pinout (VCC (3.3V), CS#, CLK, DI/DO (IO0/IO1)), SMD Code, Equivalents & Donor Boards

64Mbit (8MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (Winbond, JV/FV/DV/BV suffix = 3.3V). Preserve QE bit when flashing

Manufacturer
Winbond
Package / Case
SOIC-8 / WSON-8
Input Voltage (VIN / VCC)
2.7V – 3.6V (3.3V)
Output / Architecture
64Mbit (8MB) 3.3V SPI NOR BIOS/EC Flash
SMD Top Marking
W25X64FV

Multimeter Diagnostic & Startup Pinout Table — W25X64FV

Pin # Signal Name Role Voltage / Diagnostic Description
8VCC (3.3V)power_in3.3V supply (2.7V–3.6V)
1CS#busesActive-LOW Chip Select
6CLKbusesSerial SPI Clock
5/2DI/DO (IO0/IO1)busesSPI Data IO0/IO1
4GNDgndGround

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (W25X64FV)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact W25X64FV suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using W25X64FV

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
OEMQUANTA HKA MB—Schematic Page #10Open Schematic →
OEMQUANTA HKB MB—Schematic Page #10Open Schematic →

Technical Repair FAQ — W25X64FV

What is W25X64FV used for on a laptop motherboard?
W25X64FV by Winbond is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 package (input voltage 2.7V – 3.6V (3.3V); output/spec: 64Mbit (8MB) 3.3V SPI NOR BIOS/EC Flash). 64Mbit (8MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (Winbond, JV/FV/DV/BV suffix = 3.3V). Preserve QE bit when flashing
What is the SMD marking code for W25X64FV?
W25X64FV is top-marked directly with its part identifier (W25X64FV) on the SOIC-8 / WSON-8 package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of W25X64FV?
Key multimeter diagnostic pin measurements for W25X64FV: Pin 8 (VCC (3.3V)): 3.3V supply (2.7V–3.6V); Pin 1 (CS#): Active-LOW Chip Select; Pin 6 (CLK): Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): SPI Data IO0/IO1; Pin 4 (GND): Ground.
Which laptop motherboards use W25X64FV (donor boards)?
Confirmed laptop donor motherboards using W25X64FV include: OEM QUANTA HKA MB, OEM QUANTA HKB MB. Search SchemCAD for additional board revisions.