CAD SchemCAD
Battery ChargersTexas InstrumentsSMD (см. даташит / корпус на плате)

BQ24704 — Datasheet PDF, Startup Pinout, SMD Code, Equivalents & Donor Boards

Texas Instruments BQ24xxx Battery Charge Controller (check VCC, ACDET > 2.4V, 6V REGN LDO, and ACOK)

Manufacturer
Texas Instruments
Subsystem Category
Package / Case
SMD (см. даташит / корпус на плате)
Input Voltage (VIN / VCC)
4.5V – 24V
Output / Architecture
1–4S Li-Ion Battery Charge Controller
SMD Top Marking
BQ24704

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (BQ24704)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact BQ24704 suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using BQ24704

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
HPHP DA0LX3MB8F0 QUANTA LX3DA0LX3MB8F0Schematic Page #44Open Schematic →
MSIMSI MS-16GBMS-16GBSchematic Page #1Open Schematic →
OEMQuanta LX89 Rev 1A—Schematic Page #43Open Schematic →
MSIMSI MS-16GB1 V30 N14PGE S-1207AMS-1755Schematic Page #1Open Schematic →
MSIMSI MS-1755 MS-17551 REV1.0MS-1755Schematic Page #1Open Schematic →
HPHP ENVY 15 quanta sp7 r1a schematics—Schematic Page #1Open Schematic →
OEMquanta lx3 lx5 r1a schematics—Schematic Page #44Open Schematic →

Technical Repair FAQ — BQ24704

What is BQ24704 used for on a laptop motherboard?
BQ24704 by Texas Instruments is a Battery Chargers integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 4.5V – 24V; output/spec: 1–4S Li-Ion Battery Charge Controller). Texas Instruments BQ24xxx Battery Charge Controller (check VCC, ACDET > 2.4V, 6V REGN LDO, and ACOK)
What is the SMD marking code for BQ24704?
BQ24704 is top-marked directly with its part identifier (BQ24704) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of BQ24704?
Verify main supply rail (4.5V – 24V), output impedance on 1–4S Li-Ion Battery Charge Controller, and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use BQ24704 (donor boards)?
Confirmed laptop donor motherboards using BQ24704 include: HP HP DA0LX3MB8F0 QUANTA LX3 (DA0LX3MB8F0), MSI MSI MS-16GB (MS-16GB), OEM Quanta LX89 Rev 1A, MSI MSI MS-16GB1 V30 N14PGE S-1207A (MS-1755), MSI MSI MS-1755 MS-17551 REV1.0 (MS-1755). Search SchemCAD for additional board revisions.