CAD SchemCAD
Battery ChargersTexas InstrumentsSMD (см. даташит / корпус на плате)OFFICIAL PDF

BQ24753 — Datasheet PDF, Startup Pinout, SMD Code, Equivalents & Donor Boards

Texas Instruments BQ24xxx Battery Charge Controller (check VCC, ACDET > 2.4V, 6V REGN LDO, and ACOK)

Manufacturer
Texas Instruments
Subsystem Category
Package / Case
SMD (см. даташит / корпус на плате)
Input Voltage (VIN / VCC)
4.5V – 24V
Output / Architecture
1–4S Li-Ion Battery Charge Controller
SMD Top Marking
BQ24753

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (BQ24753)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact BQ24753 suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using BQ24753

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
SonySONY MBX-215 - MBX-235 - FOXCONN M931 IRX-5300 - REV SAMBX-215Schematic Page #48Open Schematic →
SonySONY MBX-226 FOXCONN M9A0 MP Sony Vaio VPC CWMBX-226Schematic Page #1Open Schematic →
SonySony VAIO M930 IRX-5100 MBX-215 REVMBX-215Schematic Page #48Open Schematic →
SonySony VAIO M930 IRX-5100 MBX-215 REV SBMBX-215Schematic Page #48Open Schematic →
SonySony VAIO MBX-214 M870 DDR3MBX-214Schematic Page #2Open Schematic →
SonySony Vaio VPC CW MBX 226 Schematics—Schematic Page #1Open Schematic →

Technical Repair FAQ — BQ24753

What is BQ24753 used for on a laptop motherboard?
BQ24753 by Texas Instruments is a Battery Chargers integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 4.5V – 24V; output/spec: 1–4S Li-Ion Battery Charge Controller). Texas Instruments BQ24xxx Battery Charge Controller (check VCC, ACDET > 2.4V, 6V REGN LDO, and ACOK)
What is the SMD marking code for BQ24753?
BQ24753 is top-marked directly with its part identifier (BQ24753) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of BQ24753?
Verify main supply rail (4.5V – 24V), output impedance on 1–4S Li-Ion Battery Charge Controller, and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use BQ24753 (donor boards)?
Confirmed laptop donor motherboards using BQ24753 include: Sony SONY MBX-215 - MBX-235 - FOXCONN M931 IRX-5300 - REV SA (MBX-215), Sony SONY MBX-226 FOXCONN M9A0 MP Sony Vaio VPC CW (MBX-226), Sony Sony VAIO M930 IRX-5100 MBX-215 REV (MBX-215), Sony Sony VAIO M930 IRX-5100 MBX-215 REV SB (MBX-215), Sony Sony VAIO MBX-214 M870 DDR3 (MBX-214). Search SchemCAD for additional board revisions.