CAD SchemCAD
Battery ChargersTexas InstrumentsWQFN-28 (4x4mm)OFFICIAL PDF

BQ24773RUYR — Datasheet PDF, Startup Pinout (VCC, ACDET, REGN, ACOK), SMD Code, Equivalents & Donor Boards

1–4 Cell NVDC Battery Charge Controller with I2C host interface (NOT interchangeable with SMBus BQ24770)

Manufacturer
Texas Instruments
Subsystem Category
Package / Case
WQFN-28 (4x4mm)
Input Voltage (VIN / VCC)
4.5V – 24V
Output / Architecture
1–4S NVDC I2C Charger
SMD Top Marking

Multimeter Diagnostic & Startup Pinout Table — BQ24773RUYR

Pin # Signal Name Role Voltage / Diagnostic Description
28VCCpower_inIC supply input 6–24V
6ACDETcontrolAdapter voltage detect input (2.4V–3.05V)
24REGNoutputsInternal 6V gate-driver LDO
5ACOKoutputsAdapter valid open-drain output
4ACDRVoutputsInput N-MOSFET charge-pump gate drive
11/12SDA/SCLbusesI2C serial interface to EC

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes
Pin-to-Pin Equivalents & Cross-Reference Analogs

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using BQ24773RUYR

Search SchemCAD interactive schematics and BoardViews to locate BQ24773RUYR across 39,000+ indexed laptop motherboards.

🔎 BQ24773RUYR →

Technical Repair FAQ — BQ24773RUYR

What is BQ24773RUYR used for on a laptop motherboard?
BQ24773RUYR by Texas Instruments is a Battery Chargers integrated circuit in a WQFN-28 (4x4mm) package (input voltage 4.5V – 24V; output/spec: 1–4S NVDC I2C Charger). 1–4 Cell NVDC Battery Charge Controller with I2C host interface (NOT interchangeable with SMBus BQ24770)
What is the SMD marking code for BQ24773RUYR?
The top silkscreen SMD marking code for BQ24773RUYR is BQ773, 24773 (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: Нет прямой замены на BQ24770 (разные шины I2C vs SMBus).
What are the key diagnostic pins / startup conditions of BQ24773RUYR?
Key multimeter diagnostic pin measurements for BQ24773RUYR: Pin 28 (VCC): IC supply input 6–24V; Pin 6 (ACDET): Adapter voltage detect input (2.4V–3.05V); Pin 24 (REGN): Internal 6V gate-driver LDO; Pin 5 (ACOK): Adapter valid open-drain output; Pin 4 (ACDRV): Input N-MOSFET charge-pump gate drive.
Which laptop motherboards use BQ24773RUYR (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate BQ24773RUYR across 39,000+ laptop schematics and BoardView layouts.